Xbox 360 Red Ring of Death Fix – 4 Tips to Help You If Your Xbox Fails on You

If you own an Xbox 360, I’m sure you’re familiar with the term red ring of death. Countless Xbox 360 owners have the same problem. When you see that error message appear, it means that there has been a general hardware problem and the system will not run.

You can first call the Microsoft Xbox 360 Technical Support Hotline. They may ask you a few questions and direct you to fill out a lengthy online form to request your system to be repaired, and then submit it to one of their qualified technicians.

If your system is out of warranty, you may find yourself with a rather expensive repair bill on your hands for xbox 360 red ring of death repair.

Now your second option is to do the repairs yourself or have it fixed, but the internals of the system are a total alien to you. Granted, if you were lucky enough to open it, you could probably figure out what some of the different parts did, but that’s about it.

Before you consider sending your drive in for repair to Microsoft or calling a technician for repair, there are a few steps you can take without opening the console.

#1 Unplug the console from the power outlet and disconnect all controllers and connectors. Leave it off for at least an hour and then connect the power and signal cable to your monitor, nothing else. Then turn it back on. If this works, do the following. Connect each controller and peripheral one at a time and make sure it still works. If it fails at any point, one of the controllers or other devices is faulty.

#2 If this doesn’t work and you have a hard drive attached to your Xbox, turn off the drive and unplug the hard drive. Once this is done, turn it back on. If it still doesn’t work, continue to the next step.

#3 Place your console in an area where there is a clearance between the bottom of the console and also make sure there is nothing blocking the ventilation on the sides. Let it cool down again. Do not place the console on the carpet. this will encourage rapid overheating. Turn it back on and test it if it still fails try the next step.

#4 Blow compressed air into the fan inlet. If this is blocked with dust, cold air will not get into the unit and it will quickly overheat.

If this fails, your only option is to call a technician to fix it or fix it yourself. Fixing it yourself isn’t that difficult, but you shouldn’t open your console and try without detailed instructions showing you what to do to fix Xbox 360 red ring of death.