admin Posted on 8:23 pm

How to easily install crown molding

Crown molding is the most significant architectural accent used for interior space details. In fact, you can enhance the beauty and overall look of each room by using crown molding.

It will help the spaces between the walls and the ceilings look even. Additionally, trim is used to finish fireplaces, cabinets, and built-ins.

Installing crown molding is not a new concept. Previously, homeowners used moldings to reflect the type of room and its intended purpose.

For example, reception areas were often furnished with ornate and elaborate moldings, while kitchens and other less decorative rooms in the house had simple crown moldings.

Generally, it is quite easy to configure. However, you may need the help of a handyman if you intend to install large and complex trim. Here is a quick guide on how you can install painlessly:

Planning
Most people tend to neglect this step. This is a big mistake, as if you don’t plan correctly you can end up frustrated and may make a mistake installing it.

There are different types of crown molding. Decide on the specific size and style of trim you would like to have.

The size should match the height of the ceiling in your house. Sometimes you can still go for large moldings, as long as you properly scale your carcasses to accommodate them.

Once you’ve chosen the specific size and style you want, you need to determine how much you need. Make some concessions for cutting waste.

Request all the necessary materials
In the planning phase, you will get a list of all the materials you need. In addition to the trim, you should also order adhesives, caulk, and fasteners. To save yourself the hassle of making many trips to the hardware store, buy everything you need at once.

Gather your supplies
Gather all the supplies you have purchased in a work area. While assembling them, please confirm if you have everything you need. If you notice that you forgot to get something you need, you should buy it right away.

Pre-finished
Sometimes prefinishing crown molding can be very important. Prefinishing is an excellent idea, especially in cases where you intend to use brightly colored paints in your installation process.

Design
Draw a distinctive solid line around the room where you would install it. The distance between this line and the ceiling will be its height.

This line must be straight. Next, draw another line on your ceiling to mark the projection. Use these two lines to mark the ceiling joists and wall studs.

Start installing
Start the installation process from the least visible corners. Wood trim is generally lapped at straight joints and trimmed at inside corners.

However, this is not the case in polyurethane molding. When installing this type of trim, miter cut the inside and outside corners; and use straight butt joints.

You need to cut the crown molding when it is upside down. Dry fit each piece of trim before applying adhesive. You can use finish nails to attach the trim.

Wrap
When you have installed the crown molding, allow the adhesive to dry for approximately 24 hours. You can finish your project by filling in all the holes, caulking the bottom and top, and painting it. Then proudly display your work to your friends and family.

Leave a Reply

Your email address will not be published. Required fields are marked *